[Jderobot] error with configuration of the project

Roberto Calvo rocapal en gsyc.urjc.es
Mar Mar 17 11:36:53 CET 2015 

Hi,

Just create the following directory, and run cmake again. This should
fix the problem.

mkdir -p /home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/

Best,

El lun, 16-03-2015 a las 16:17 -0700, porcell1 escribió:
> Hi 
> I try to compile the jderobot project but the cmake istruction return always
> error
> someone can say me what is the problem?
> 
> this is the output
> 
> tonio en XPS14:~/Documenti/jderobot/JdeRobot$ cmake .
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/colorspaces
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/jderobotutil
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/progeo
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/pioneer
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/fuzzylib
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/visionlib
> /home/tonio/Documenti/jderobot/JdeRobot/src/stable/libs/parallelIce
> *** GAZEBO LIBRARIES NOT FOUND
> *** Fireware ok
>  with_pcl PCL LIBRARY FOUND IN with_pcl-NOTFOUND
> *** PCL libraries not found. Are needed to KinectServer component
> *** OpenNi not found
> *** Nite not found
> *** Xerces ok
> /usr/include/libxml2
> *** ICE ok
> *** CWIID LIBRARIES NOT FOUND. Needed to wiimoteServer
> OpenCVHighGui was found in: /usr/include/opencv
> OpenCV was found in: /usr/include/opencv
> OpenGL libraries found at
> /usr/lib/x86_64-linux-gnu/libglut.so;/usr/lib/x86_64-linux-gnu/libXmu.so;/usr/lib/x86_64-linux-gnu/libXi.so
> OpenNI2 library not found
> NITE2 library not found
> Libxml++ libraries found at 
> *** LIBXML2 ok
> -- Boost version: 1.54.0
> -- Found the following Boost libraries:
> --   system
> --   filesystem
> *** ALUT not found
> *** LIBTINYXML ok
> -- checking for module 'gtkglextmm-1.2'
> --   package 'gtkglextmm-1.2' not found
> CMake Error at /usr/share/cmake-2.8/Modules/FindPkgConfig.cmake:283
> (message):
>   A required package was not found
> Call Stack (most recent call first):
>   /usr/share/cmake-2.8/Modules/FindPkgConfig.cmake:337
> (_pkg_check_modules_internal)
>   Deps/gtk2/CMakeLists.txt:10 (PKG_CHECK_MODULES)
>   CMakeLists.txt:98 (include)
> 
> 
> *** QT LIBRARIES Found LIBRARIES FOUND
> *** Goocanvasmm LIBRARIES NOT FOUND
>  kobuki_LIBRARIES 
> *** kobuki not found
> *** libusb NOT FOUND
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/kinectleds_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/naomotions_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/camera_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/jointmotor_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/naofollowball_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/wiimote_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/pose3dencoders_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/datetime_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/recorder_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/remoteConfig_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/pointcloud_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/jcm_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/common_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/sonars_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/exceptions_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/containers_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/replayControl_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/pose3dmotors_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/bodyencoders_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/ptencoders_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/varcolor_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/body_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/remoteCloud_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/pose3d_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/bodymovements_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/bodymotors_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/namingService_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/genericData_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/laser_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/encoders_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/motors_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/ptmotors_ice.py':
> No such file or directory
> /usr/bin/slice2py: error: cannot
> open`/home/tonio/Documenti/jderobot/JdeRobot/src/stable/interfaces/slice/jderobot/../../python/jderobot/image_ice.py':
> No such file or directory
> -- Creating CPP interfaces
> version:4.8.2
> -- Boost version: 1.54.0
> -- Found the following Boost libraries:
> --   system
> --   filesystem
> -- Processing component giraffeServer
> -- Processing component basic_server
> -- Processing component openniServer
> -- Processing component teleoperator
> -- Processing component icestorm
> -- Processing component rgbdManualCalibrator
> -- Processing component cameraview
> -- Processing component rgbdCalibrator
> -- Processing component basic_component
> -- Processing component cameraserver
> -- Processing component opencvdemo
> -- Processing component introrob
> -- Processing component remoteConfiguration
> -- Processing component introrob_qt
> -- Processing component naoviewer
> -- Processing component gazeboserver
> -- Processing component replayer
> -- Processing component giraffeClient
> -- Processing component visualHFSM
> -- Processing component naoserver
> -- Processing component pclRGBDServer
> -- Processing component kobuki_driver
> -- Processing component namingService
> -- Processing component openni1Server
> -- Processing component colorTuner
> -- Processing component basic_component_qt
> -- Processing component recorder
> -- Processing component replayController
> -- Processing component cameraview_icestorm
> -- Processing component followBall
> -- Processing component rgbdViewer
> -- Configuring incomplete, errors occurred!
> See also
> "/home/tonio/Documenti/jderobot/JdeRobot/CMakeFiles/CMakeOutput.log".
> See also
> "/home/tonio/Documenti/jderobot/JdeRobot/CMakeFiles/CMakeError.log".
> 
> 
> 
> 
> --
> View this message in context: http://jderobot-developer-list.2315034.n4.nabble.com/Jderobot-error-with-configuration-of-the-project-tp4642506.html
> Sent from the Jderobot Developer List mailing list archive at Nabble.com.
> _______________________________________________
> Jde-developers mailing list
> Jde-developers en gsyc.es
> http://gsyc.escet.urjc.es/cgi-bin/mailman/listinfo/jde-developers

-- 
Roberto Calvo Palomino        | Robotics Lab (GSyC) 
R&D Android Mobile Engineer   | Universidad Rey Juan Carlos

Twitter: @rocapal 
Linkedin: http://www.linkedin.com/in/rocapal

More information about the Jde-developers mailing list